Skip to content

Plastering in Birmingham

AV Builders & Roofing skim coat, fill and finish walls and ceilings across Birmingham and the surrounding areas. Whether it's a small repair, a full room renovation or skimming over old woodchip, we get the surface smooth, level and ready to decorate.

  • Skim coating walls and ceilings
  • Patch repairs and spot fills
  • Textured finishes
  • Damp-proof plaster

When you need plastering, not just filler

Not every wall defect needs a plasterer. Some are quick cosmetic fixes. These are the signs that point towards proper plastering work.

  • Large areas of flaking or peeling plasterOld plaster letting go from the wall, or lime mortar crumbling away. Patching won't hold; the base needs replastering.
  • Visible cracks running through walls or ceilingsFine hairline cracks in paint are surface; deep cracks in plaster suggest movement or failed base coats.
  • Uneven, wavy or rippled surfacesWalls that dip, bulge or don't sit true need levelling before decoration. Paint won't hide it.
  • Damp patches or salts on the plasterRising damp or water ingress leaves stains, loose plaster and mineral deposits. The old plaster often needs stripping back and replacing with damp-proof plaster.
  • Textured coatings (Artex, woodchip) you want smoothCovering or removing old texture calls for skim coating the whole surface for a uniform finish.
  • Joining new work to old plasterExtensions, new walls or reopened doorways need blending in; a full skim creates a uniform finish.

Not sure what your wall needs? Send us a photo on WhatsApp and we'll say whether a quick fill, a spot repair or full replastering is the right call.

Plaster finishing work

How plastering is done right

Good plastering is about preparation, skill and patience. Here's how the job runs from start to finish.

  1. Survey and quote

    We look at the walls and ceilings, check what's solid and what's loose, and talk through what finish you want. You get a clear written quote before we start.

  2. Strip back loose plaster

    Any old plaster that's not firmly bonded comes off. We hack back to solid base — brick, block, lath or existing sound plaster — so the new coat will grip.

  3. Prepare the surface

    Dust is brushed off, any grease or polish cleaned away, and the base damped with water. This stops the plaster drying too fast and failing to bond.

  4. Apply base coat (scratch coat)

    A thick undercoat of base plaster is trowelled on and roughed up with a scratch. This gives the finish coat something to grip to.

  5. Float the second coat

    Once the base is set, a thinner middle coat (float coat) is applied and levelled with a darby and float, building up the wall flat and true.

  6. Finish coat and trowel up

    The final skim coat of finish plaster goes on, trowelled smooth and polished with a steel trowel to a blemish-free surface ready for paint or wallpaper.

  7. Drying and decoration

    Fresh plaster needs time to cure before it's sealed or painted. We'll talk through timings and prep for whatever comes next.

Standards and rules for internal plaster

Interior plastering is usually covered by Building Regulations and trade standards that protect the finish and your home.

Building Regulations (Part M and L)

If you're carrying out significant works to walls (alterations, extensions or renovations), plaster may need to meet insulation or accessibility standards depending on the scope.

BS 5492

This is the code of practice for internal plasterwork. It covers materials, application, drying times and tolerances for flat and finished surfaces.

Damp-proof plaster (BS 12859)

Plaster in damp-prone areas (basements, bathrooms, kitchens) should be a damp-resistant formulation to prevent salt attack and deterioration.

Fire ratings

Some projects (especially commercial or communal spaces) need plaster systems that meet fire resistance. Domestic walls usually don't, but we'll flag it if your job does.

Asbestos in old plaster

Plaster in homes before the 1980s may contain asbestos fibres. Don't scrape or hack it without testing. We'll arrange testing and safe removal if needed.

Types of plaster finish and when to use them

The plaster you choose affects durability, maintenance and how the room looks. We'll help you pick the right one for the space.

Smooth skim coat

A fine finish trowelled flat and polished. The standard for living areas, bedrooms and anywhere you want a clean, modern look. Easy to paint and suits any decor.

Best for: most rooms, feature walls, clean contemporary homes

Textured finish

A stippled or patterned surface that hides minor defects and adds interest. Can be rustic or subtle. Needs care when cleaning and is harder to repaint if the texture is thick.

Best for: hiding cracks, period properties, feature areas

Polished plaster

A sealed, burnished finish that looks almost like marble or concrete. Hardwearing and low-maintenance, but takes skill to execute and costs more.

Best for: showrooms, commercial spaces, premium finishes

Damp-resistant plaster

A specially formulated base plaster with fungicide and salt-resistant additives. Used in basements, bathrooms, kitchens and anywhere prone to moisture.

Best for: damp environments, new builds, problem walls

Lime mortar plaster

A traditional breathable plaster used on period homes and listed buildings. It moves with the building and allows damp to pass through naturally.

Best for: old cottages, heritage properties, listed buildings

Acoustic tile or spray finish

Not plaster, but sometimes used for sound absorption in offices or utility areas. We can remove old acoustic and replace with clean plaster if you prefer.

Best for: offices, garages, areas needing soundproofing

What's included in a plastering quote

  • Survey and advice on what needs doing
  • Hacking off loose old plaster
  • Preparing the base (damping, cleaning, filling gaps)
  • Base coat (scratch coat) plaster
  • Float coat to build level and flat
  • Finish coat skim
  • Trowelling smooth and polished
  • Dust control and clean-up
  • Making good and pointing around pipework
  • Advice on primer and paint compatibility

What moves the price of plastering

Every room is different. These factors change how much plaster work costs.

  • Area and number of walls. More surface means more time and more material.
  • Condition of the base. Sound walls skim faster. Loose, damp or heavily damaged bases take longer to strip and repair.
  • Height and access. Ceilings and high walls need scaffolding or tower access, which adds cost and time.
  • Surface preparation needed. Old texture to remove, grease, paint or repairs all add to the labour.
  • Finish quality. A simple textured finish costs less than a perfectly smooth, polished skim.
  • Specialist plaster. Damp-proof, lime mortar or fire-rated plaster costs more than standard gypsum plaster.
  • Redecoration. Primer, paint and other finishes are quoted separately unless you ask for them included.

Looking after fresh plaster

New plaster needs care in the first few weeks so it cures properly and doesn't crack or fail.

  • Let it dry fully. Fresh plaster needs 2–4 weeks to cure depending on humidity and thickness. Don't rush to paint or wallpaper.
  • Avoid draughts and damp. Close windows and doors during drying. Don't use fans or heaters directly on the plaster.
  • Prime before painting. Use a proper plaster primer; it seals the porous surface and stops paint absorption and uneven finish.
  • Watch for cracks in the first month. Fine cracks as plaster shrinks are normal. Wider cracks or ones that reappear need a spot repair.
  • Keep humidity steady. Very dry air can cause plaster to shrink and crack. Very damp air slows cure and can cause mould or efflorescence.
  • Don't fix damage immediately. Let new plaster age before patching so the repair and original plaster shrink together.

Deep did a wonderful job — we honestly can't complain! A 10 out of 10 from both me and my wife. We were absolutely shocked by how quickly and efficiently Deep and his team worked.

Homeowner review, renovation and plastering

Plastering questions, answered

How long does it take to plaster a room?

It depends on the size and condition of the walls. A single bedroom might take 2–3 days. A larger room with damaged walls needing stripping back could take a week. We work on multiple coats and drying times, so the job can't be rushed. We'll give you a realistic timeline with the quote.

Can you plaster over old wallpaper or paint?

No. Old wallpaper, loose paint and any surface that won't grip the plaster has to come off first. We strip everything back to bare wall, block or lath so the new plaster bonds properly. This is part of the prep work in the quote.

What's the difference between plasterboard and plaster skim?

AV Builders & Roofing does skim coating on walls — trowelling fresh plaster by hand onto the existing base. Plasterboard (drywall) is installing sheets of board on studs, which is a different job. Many renovation projects do both: we board up new walls, then skim them all to a uniform finish.

How soon can I paint after plastering?

New plaster needs to dry thoroughly — usually 2–4 weeks depending on how thick it is and how humid the room is. Paint too early and it can trap moisture, leading to mould and paint failure. We'll always advise you to wait and use a proper plaster primer when you're ready.

Can you repair a small damp patch without replastering the whole wall?

Sometimes, but only if the damp is fixed first. If the wall is damp, the whole affected area needs stripping back and replastering with damp-proof plaster. Patching over damp plaster will just fail again. We'll identify the cause (a leak, rising damp, condensation) and sort it properly before we plaster.

Do you remove old Artex or woodchip?

Yes. We carefully strip old Artex or woodchip wallcovering, then skim the wall smooth with fresh plaster. This takes longer than plastering a bare wall because of the prep work, but it gives you a modern, clean finish. If the old covering contains asbestos (pre-1980s homes), we'll arrange safe professional removal first.

Where we plaster

We carry out plastering work across Birmingham and the surrounding areas. Here are the nearest districts.

Also covering Quinton, Sutton Coldfield, Solihull, Smethwick and West Bromwich. See every area we cover.

Get a written quote for your plastering

Tell us which rooms need plaster, the condition of the walls and what finish you want. We'll come back with a clear written quote.

Call us on0121 123456